Products

Petrol is a complex mixture , a highly refined, volatile liquid hydrocarbon fuel derived from crude oil and is formulated primarily for use in spark-ignition internal combustion engines, such as those found in cars, motorcycles, small boats, and light machinery.
‍

Petrol is produced through a combination of refinery processes including distillation, catalytic cracking, reforming, and blending, which adjust its volatility, stability, and combustion performance. Modern petrol contains additives to improve engine efficiency, reduce deposits, prevent corrosion, and control emissions.
‍

A primary performance parameter is the octane rating, measured as Research Octane Number (RON) and Motor Octane Number (MON), which defines the fuel’s resistance to knock in spark-ignition engines. Typical commercial grades range from 91–98 RON, depending on market standards

Diesel ADF ( Automotive Diesel Fuel)
‍

Diesel ADF is a refined middle-distillate hydrocarbon fuel for compression-ignition engines. It is produced via distillation, hydrotreating, and blending to meet required cetane number, viscosity, density, and cold-flow properties. Modern formulations may include additives for lubricity, stability, corrosion protection, and cold-weather performance. Typical specifications include cetane 45–55, low sulphur, and flash point >55°C. Diesel ADF complies with standards such as EN 590 or ASTM D975 and is optimized for engine efficiency and emission control.

LNG (liquified natural gas) is natural gas that is converted into liquid by cooling, at -162°C the gas turns into liquid and its volume significantly reduced for storage and  transport in large volumes via bulk ship or in ISO containers.  When reverted into its gaseous state it is ready for use.

‍

LNG in ISO containerised tanks can be delivered to and located at the end users facility to become a direct feed supply line connection.

Bitumen is a viscous, black hydrocarbon from crude oil, used for roads, roofing, and coatings. It is characterized by softening point, penetration, viscosity, and ductility, and can be modified with polymers or additives to improve performance.